Rosmo
@rosmo.bsky.social
Robotics pack & feed: https://bsky.app/profile/rosmo.bsky.social/feed/robotics
Reddit-like view of Bsky robotics feed: https://azsky.app/profile/rosmo.bsky.social/feed/robotics
Open hardware robotics https://rosmo-robot.github.io/
10% Engineer
Reddit-like view of Bsky robotics feed: https://azsky.app/profile/rosmo.bsky.social/feed/robotics
Open hardware robotics https://rosmo-robot.github.io/
10% Engineer
Possibly the whole corner brace & motor mount could be two pieces of PCB, might try it easyeda.com/editor#id=3e...
November 15, 2025 at 4:18 PM
Possibly the whole corner brace & motor mount could be two pieces of PCB, might try it easyeda.com/editor#id=3e...
Wondering if PCB would be strong enough for motor mounts for extrusion, possibly if doubled up easyeda.com/editor#id=3e...
November 15, 2025 at 4:08 PM
Wondering if PCB would be strong enough for motor mounts for extrusion, possibly if doubled up easyeda.com/editor#id=3e...
Those wheels fit in these tyres pretty well with a bit of adhesive to stop slipping www.aliexpress.com/item/4000182... raw.githubusercontent.com/samuk/Sawppy...
November 14, 2025 at 11:37 PM
Those wheels fit in these tyres pretty well with a bit of adhesive to stop slipping www.aliexpress.com/item/4000182... raw.githubusercontent.com/samuk/Sawppy...
You've got me thinking about a BOM now.. Four eu.odriverobotics.com/shop/botwheels two of @sequoia.farm github.com/sequoia-hope... a couple of Sodium Ion batteries, and a bunch of aluminum framing. openroboticplatform.com mount plates..
November 14, 2025 at 9:36 PM
You've got me thinking about a BOM now.. Four eu.odriverobotics.com/shop/botwheels two of @sequoia.farm github.com/sequoia-hope... a couple of Sodium Ion batteries, and a bunch of aluminum framing. openroboticplatform.com mount plates..
It was supposed to fit together like this.
November 12, 2025 at 4:32 PM
It was supposed to fit together like this.
Annoyingly JLC placed a 15v buck where a 12v should have been so will have to wait for that to be sorted
November 12, 2025 at 4:30 PM
Annoyingly JLC placed a 15v buck where a 12v should have been so will have to wait for that to be sorted
Found a bit of time to play robots..
November 10, 2025 at 2:29 PM
Found a bit of time to play robots..
Work in progress: Autonomous Rover for weed detection and removal https://www.reddit.com/r/robotics/comments/1jygxks/work_in_progress_autonomous_rover_for_weed/Just wanted to give quick peek at my ongoing project. I am developing an AMR to autonomously navigate my property and to find weeds and
April 24, 2025 at 1:55 PM
Work in progress: Autonomous Rover for weed detection and removal https://www.reddit.com/r/robotics/comments/1jygxks/work_in_progress_autonomous_rover_for_weed/Just wanted to give quick peek at my ongoing project. I am developing an AMR to autonomously navigate my property and to find weeds and
Anyware Robotics is hiring! https://www.reddit.com/r/robotics/comments/1iw19kl/anyware_robotics_is_hiring/Hey folks, Anyware Robotics is hiring for electrical engineers! We are a start-up company based in the Silicon Valley working on mobile manipulators. Take a look! Our robot can do unloading,
February 23, 2025 at 3:30 PM
Anyware Robotics is hiring! https://www.reddit.com/r/robotics/comments/1iw19kl/anyware_robotics_is_hiring/Hey folks, Anyware Robotics is hiring for electrical engineers! We are a start-up company based in the Silicon Valley working on mobile manipulators. Take a look! Our robot can do unloading,
Who wants to see a Robot Boxing match? https://www.reddit.com/r/robotics/comments/1iu6h79/who_wants_to_see_a_robot_boxing_match/I got approval from both companies to do this match. Even have a local boxing ring that is going to let me have it. Plan is to film later this month. Stay tuned! Not
February 21, 2025 at 4:12 PM
Who wants to see a Robot Boxing match? https://www.reddit.com/r/robotics/comments/1iu6h79/who_wants_to_see_a_robot_boxing_match/I got approval from both companies to do this match. Even have a local boxing ring that is going to let me have it. Plan is to film later this month. Stay tuned! Not
Recently helped a friend clean out some stuff, and got to acquire some things. Any advice on what to do with these 4? https://www.reddit.com/r/robotics/comments/1is883f/recently_helped_a_friend_clean_out_some_stuff_and/submitted by /u/CumminsMovers [link] [comments] (Feed generated with FetchRSS)
February 18, 2025 at 12:24 PM
Recently helped a friend clean out some stuff, and got to acquire some things. Any advice on what to do with these 4? https://www.reddit.com/r/robotics/comments/1is883f/recently_helped_a_friend_clean_out_some_stuff_and/submitted by /u/CumminsMovers [link] [comments] (Feed generated with FetchRSS)
Noticing a correlation between search terms for #fascism and #Bluesky
trends.google.com/trends/explo...
trends.google.com/trends/explo...
February 16, 2025 at 11:11 PM
Noticing a correlation between search terms for #fascism and #Bluesky
trends.google.com/trends/explo...
trends.google.com/trends/explo...
Hmm OK that's not gonna work.
January 25, 2025 at 7:34 PM
Hmm OK that's not gonna work.
Is there a I2C_SDA lurking somewhere? I see SCL here, but no SDA?
January 25, 2025 at 5:40 PM
Is there a I2C_SDA lurking somewhere? I see SCL here, but no SDA?
Playing about with @freecad.bsky.social to try and get a URDF working for simuation
December 30, 2024 at 2:51 PM
Playing about with @freecad.bsky.social to try and get a URDF working for simuation
I love it when the Imperial country makes jokes about measurements
December 30, 2024 at 11:02 AM
I love it when the Imperial country makes jokes about measurements
Trying this breakout easyeda.com/editor#id=9b...
Will have a USB-C on it to minimise the amount of connecting bits needed to have a functioning ESP cam
Will have a USB-C on it to minimise the amount of connecting bits needed to have a functioning ESP cam
December 26, 2024 at 9:56 PM
Trying this breakout easyeda.com/editor#id=9b...
Will have a USB-C on it to minimise the amount of connecting bits needed to have a functioning ESP cam
Will have a USB-C on it to minimise the amount of connecting bits needed to have a functioning ESP cam
The 'medium' does require stripping 8 cables to connect to the higher power motor driver. Smaller rosmo is just plug and play.
December 18, 2024 at 12:40 PM
The 'medium' does require stripping 8 cables to connect to the higher power motor driver. Smaller rosmo is just plug and play.
Starting to play around with the 'medium' robot now the small one is working rosmo-robot.github.io/medium/ [https://rosmo-robot.github.io/medium/]
December 17, 2024 at 12:26 PM
Starting to play around with the 'medium' robot now the small one is working rosmo-robot.github.io/medium/ [https://rosmo-robot.github.io/medium/]
Pulled out the 'medium' rosmo today. Now the small one is functioning maybe time to play with that
December 8, 2024 at 12:26 PM
Pulled out the 'medium' rosmo today. Now the small one is functioning maybe time to play with that
OK might actually make this one easyeda.com/editor#id=28...
December 7, 2024 at 10:02 PM
OK might actually make this one easyeda.com/editor#id=28...
Playing around with yet another daughter board idea. This one may be slightly more sane easyeda.com/editor#id=28... #robotics
December 7, 2024 at 7:55 PM
Playing around with yet another daughter board idea. This one may be slightly more sane easyeda.com/editor#id=28... #robotics
The underside
#robotitics people what else should I add to this sensor hat for rosmo-robot.github.io
#robotitics people what else should I add to this sensor hat for rosmo-robot.github.io
December 5, 2024 at 9:07 PM
The underside
#robotitics people what else should I add to this sensor hat for rosmo-robot.github.io
#robotitics people what else should I add to this sensor hat for rosmo-robot.github.io
Working on a breakout I'm calling 'the kitchen sink' zero restraint. If I think of it, then bolt it on.
easyeda.com/editor#id=02...
Still not fully routed.
easyeda.com/editor#id=02...
Still not fully routed.
December 5, 2024 at 9:04 PM
Working on a breakout I'm calling 'the kitchen sink' zero restraint. If I think of it, then bolt it on.
easyeda.com/editor#id=02...
Still not fully routed.
easyeda.com/editor#id=02...
Still not fully routed.