@rhylonight.bsky.social
I got accepted as vendor at FurryTeaParty 2026🥳
November 22, 2025 at 5:11 PM
I got accepted as vendor at FurryTeaParty 2026🥳
I just bought a laptop sleeve WHYYYYYYYY😭
www.youtube.com/watch?v=A8E9...
www.youtube.com/watch?v=A8E9...
Introducing the Savage Industries EGBG, Laptop Sleeve and Apron!
YouTube video by Adam Savage’s Tested
www.youtube.com
November 22, 2025 at 3:09 PM
I just bought a laptop sleeve WHYYYYYYYY😭
www.youtube.com/watch?v=A8E9...
www.youtube.com/watch?v=A8E9...
Made a bunch of boxes that turns into a bunk bed stair when they are stacked together. Mostly out of discarded desks♻️.
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
November 19, 2025 at 11:56 AM
Made a bunch of boxes that turns into a bunk bed stair when they are stacked together. Mostly out of discarded desks♻️.
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
PS: Each step is within 5mm of difference, the distortion of the lens made them look wonky lol
This captures my vibe pretty well:
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
November 18, 2025 at 9:37 AM
This captures my vibe pretty well:
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
-Mint condition 2015 Macbook Pro with protective case
-Cheap tea carelessly resting on the MacBook
-Using a Makita MakPac as a table
-Using a chunk of foam leftover from making my fursuit tail as a seat cushion
-Me sitting on floor, trying to fix the router
I made a splitter thingy (three cats) for this automatic feeder
The compound angle is surprisingly challenging to deal with💀
The compound angle is surprisingly challenging to deal with💀
November 17, 2025 at 4:12 PM
I made a splitter thingy (three cats) for this automatic feeder
The compound angle is surprisingly challenging to deal with💀
The compound angle is surprisingly challenging to deal with💀
This ant colony is trying to carry our cats' kibble into the wall🧐
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
November 16, 2025 at 5:47 PM
This ant colony is trying to carry our cats' kibble into the wall🧐
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
It's very impressive since one single piece of kibble is about 10X of their size, imagine ten adults carrying a car with their bare hands!
Random Rhylo thoughts:
Coelacanth's pronunciation is totally not what I imagined, it's SEE-lə-kanth. I've always thought it's Co-Ella-kanth🙃
www.youtube.com/watch?v=U68F...
Coelacanth's pronunciation is totally not what I imagined, it's SEE-lə-kanth. I've always thought it's Co-Ella-kanth🙃
www.youtube.com/watch?v=U68F...
This Coelacanth's Got Quite a Story!
YouTube video by Adam Savage’s Tested
www.youtube.com
November 11, 2025 at 4:36 AM
Random Rhylo thoughts:
Coelacanth's pronunciation is totally not what I imagined, it's SEE-lə-kanth. I've always thought it's Co-Ella-kanth🙃
www.youtube.com/watch?v=U68F...
Coelacanth's pronunciation is totally not what I imagined, it's SEE-lə-kanth. I've always thought it's Co-Ella-kanth🙃
www.youtube.com/watch?v=U68F...
November 2, 2025 at 1:57 AM
Reposted
Omg hi!
I'm Ela, I'm trans, I've written two dozen books including the recently released superhero novels Penumbra and its sequel, Redshift!
My work often explores social issues and themes of queerness, and is strongly inspired by the likes of Terry Pratchett and Douglas Adams.
I'm Ela, I'm trans, I've written two dozen books including the recently released superhero novels Penumbra and its sequel, Redshift!
My work often explores social issues and themes of queerness, and is strongly inspired by the likes of Terry Pratchett and Douglas Adams.
PENUMBRA by Ela Maxima
elajo.itch.io
February 1, 2025 at 12:05 AM
Omg hi!
I'm Ela, I'm trans, I've written two dozen books including the recently released superhero novels Penumbra and its sequel, Redshift!
My work often explores social issues and themes of queerness, and is strongly inspired by the likes of Terry Pratchett and Douglas Adams.
I'm Ela, I'm trans, I've written two dozen books including the recently released superhero novels Penumbra and its sequel, Redshift!
My work often explores social issues and themes of queerness, and is strongly inspired by the likes of Terry Pratchett and Douglas Adams.
Reposted
Curious what the inside of a nylon SLS 3D printer looks like? Or how additive material properties are tested and optimized?
I've got good news for you! I filmed a lab tour at Formlabs and they let me poke around engineering, testing, machine shop and chem labs 😊
www.youtube.com/watch?v=v7r7...
I've got good news for you! I filmed a lab tour at Formlabs and they let me poke around engineering, testing, machine shop and chem labs 😊
www.youtube.com/watch?v=v7r7...
The Science and Engineering at Formlabs - R&D Tour
YouTube video by Breaking Taps
www.youtube.com
January 29, 2025 at 3:53 PM
Curious what the inside of a nylon SLS 3D printer looks like? Or how additive material properties are tested and optimized?
I've got good news for you! I filmed a lab tour at Formlabs and they let me poke around engineering, testing, machine shop and chem labs 😊
www.youtube.com/watch?v=v7r7...
I've got good news for you! I filmed a lab tour at Formlabs and they let me poke around engineering, testing, machine shop and chem labs 😊
www.youtube.com/watch?v=v7r7...
Refreshingly honest and introspective🥺
January 29, 2025 at 5:10 PM
Refreshingly honest and introspective🥺
Reposted
Sewing corner ready!🧵
Brain is not ready to learn how to use the sewing machine😵💫!
Brain is not ready to learn how to use the sewing machine😵💫!
January 26, 2025 at 7:17 PM
Sewing corner ready!🧵
Brain is not ready to learn how to use the sewing machine😵💫!
Brain is not ready to learn how to use the sewing machine😵💫!
T minus 27 days till furry con😱
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
January 24, 2025 at 6:53 AM
T minus 27 days till furry con😱
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
So far I got the fur fabrics, the polyfil cotton, the foam, the patterns for the tail and paws on hand.
Got zero progress on the head.
Will try and get a basic sewing spot set up and sew the paws or tail this weeked!💪
Reposted
And last but certainly not least, we are thrilled to reveal the preview of the completed Nightmare Kart build! We put everything we have into this cab, and we can't wait to show it to you! Come see it at the panel with @b0tster.yeag.gay , then it'll be on the show floor!
January 23, 2025 at 8:07 PM
And last but certainly not least, we are thrilled to reveal the preview of the completed Nightmare Kart build! We put everything we have into this cab, and we can't wait to show it to you! Come see it at the panel with @b0tster.yeag.gay , then it'll be on the show floor!
Here's a failed project:
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
January 23, 2025 at 6:28 AM
Here's a failed project:
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
I made this handle for a super heavy camera (Mamiya RB67, ~3KG).
I custom ordered a piece of bent stainless steel. I designed and 3D printed (knife) scales, and attached them on the stainless steel with Chicago screws.
(1/2)
Reposted
was talking to partner about this and dissociation and it reminded me of this comic I made years ago.
January 22, 2025 at 8:10 AM
was talking to partner about this and dissociation and it reminded me of this comic I made years ago.
My inkjet printer's black nozzle is clogged🙁
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
January 22, 2025 at 8:37 AM
My inkjet printer's black nozzle is clogged🙁
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
The price for a new nozzle is the same price of the machine, the price for a new ink cartridge is 20% of the machine.
I decided to not get it fixed and not buy a new one, I'll go to print shops from now on. At least the scanner is still functional🙃
Reposted
Not gonna be at magfest but my art will be
January 21, 2025 at 7:14 PM
Not gonna be at magfest but my art will be
Version 2!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
January 21, 2025 at 8:10 PM
Version 2!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
I printed V1 in matte PLA, which feels terrible to touch, I think it leave a trace amount of dust on my fingers.
I printed V2 in regular PETG, I added a thin "waist" in the mid section, and it feels much better to touch!
If i won the lottery, I won't tell anyone, but there would be signs...
(e.g. rockets are cool!)
www.youtube.com/watch?v=YZaj...
(e.g. rockets are cool!)
www.youtube.com/watch?v=YZaj...
How to Build a High Power Rocket! (Tutorial)
YouTube video by Xyla Foxlin
www.youtube.com
January 21, 2025 at 11:32 AM
If i won the lottery, I won't tell anyone, but there would be signs...
(e.g. rockets are cool!)
www.youtube.com/watch?v=YZaj...
(e.g. rockets are cool!)
www.youtube.com/watch?v=YZaj...
I've been cleaning/decluttering/organizing my room, and I found the Olfa scalpel I used to use a lot!
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
January 20, 2025 at 4:09 PM
I've been cleaning/decluttering/organizing my room, and I found the Olfa scalpel I used to use a lot!
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
However, the cap is missing, and the rubber grip is pretty shitty to begin with.
After 1 min of searching and 45min of 3D printing, I have replacement parts now! (links in ALT text)
Reposted
& just to re-iterate: Prusa is NOT open source.
January 19, 2025 at 10:55 PM
& just to re-iterate: Prusa is NOT open source.