Bark it Up! Suits and Rave Gear
@barkitup.dog
Custom Rave gear, Fursuits and adoptable Art refs
-
Owners
@zbit.barkitup.dog -Electronics and Management.
@mori.barkitup.dog -Fursuits and Art
Banner art @beeptreat.bsky.social
-
Owners
@zbit.barkitup.dog -Electronics and Management.
@mori.barkitup.dog -Fursuits and Art
Banner art @beeptreat.bsky.social
Pinned
🦊 ZettaLights - Custom LED Harnesses
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
Box!
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
November 18, 2025 at 4:07 PM
Box!
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
Designed for easy use, even while wearing paws or mitts.
3d printed PETG enclosure.
Integrated clip.
Slide toggle switch for on/off.
Low profile to prevent accidental toggle.
Single push button to change or lock the mode.
Single swappable 18650 battery.
USB-C for run and/or charge.
Work shopping some hook and loop for slight adjustability at some key connection points.
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
November 18, 2025 at 3:35 PM
Work shopping some hook and loop for slight adjustability at some key connection points.
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
New X design
Allows the leg strap add-ons on the current MFF 7-point build to be modular
Will update with some better photos once the harness is on the fursuit it was measured for
Set for LAUNCH!
<3
-Z
Got a battery for the multimeter.
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
November 11, 2025 at 1:33 AM
Got a battery for the multimeter.
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
Power testing puts my 600+ LED and 6+ hour runtime estimates in the ballpark of EXTREMELY conservative.
TL;DR: there's enough juice to rave all night.
Also run+charge via power bank or swap 18650 batteries.
Either way, the power ceiling is HIGH.
<3
-Z
🦊 ZettaLights - Custom LED Harnesses
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
November 9, 2025 at 10:37 PM
🦊 ZettaLights - Custom LED Harnesses
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$650-1500+ | Standard or full custom
Pre-orders launch MFF weekend.
Production starts January.
barkitup.dog
MFF prepping!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
November 9, 2025 at 9:33 PM
MFF prepping!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
New 'Full' 7-Point Style! (with Leg Strap Add-on)
252 LEDs! (+106 LEDs = 358 LEDs)
Designed for a friend in fursuit so excuse the slack! :3
Redesigned 'X' 4-Point Style!
138 LEDs!
Let's gooo!
Field testing!
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
October 27, 2025 at 8:29 PM
Field testing!
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
Gear night at a local venue.
A lot of fun! Pups, fuzzies, and everything in between!
We got in a bit early to get some action shots before it got bumping.
🦊 ZettaLights - Custom LED Harnesses
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
October 25, 2025 at 6:40 PM
🦊 ZettaLights - Custom LED Harnesses
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
What makes us different:
🎵 Real FFT analysis (8 frequency ranges)
⚡ 600+ LED capacity*
🔋 User-swappable 18650 (6+ hour runtime**)
🔓 Open source everything
💻 Custom engineered PCB
$500-650+ | Standard or full custom builds
Pre-orders: barkitup.dog
Open Source?
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Open Source! Soft-Launch | BarkItUp
Get more from BarkItUp on Patreon
www.patreon.com
October 22, 2025 at 11:11 AM
Open Source?
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Yes!
Testing has succeeded and I think it's in a working state.
Engineered PCB design files, firmware, and current 2.0 Arduino code.
www.patreon.com/posts/141779...
Yay!
<3
-Z
Slightly thrown together in 2 evenings so it can be tested tonight and at other events!
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
October 17, 2025 at 3:13 PM
Slightly thrown together in 2 evenings so it can be tested tonight and at other events!
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
Reconsidering the heat shrink on the links or perhaps more exact measure of wiring and shrink.
Will see how it holds up in testing!
<3
-Z
Oh yeah!
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
October 16, 2025 at 2:26 PM
Oh yeah!
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
We got a business card!
Testing the hardware at a few local venues in the coming weeks.
Pre-order soft launch to follow!
<3
-Z
All the pieces are in place, time to start building!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
October 10, 2025 at 2:51 PM
All the pieces are in place, time to start building!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
This one will have plastic buckles and stainless steel hardware due to a nickel sensitivity of the wearer.
Testing layouts and some application of heat shrink for a little extra protection!
Hm yes lovely.
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
October 8, 2025 at 12:57 AM
Hm yes lovely.
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
Was doing the finishing touches before the nose and mouth inserts and pulled too hard on the backing on the left side. Now I have to replace the red parts that are taped for the pattern.
Other than that hiccup, the head is almost done.
The fursuit makers chacha never ends.
-Mori
Box! v2!
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
October 1, 2025 at 9:42 PM
Box! v2!
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
Clear(ish) PETG, slightly thicker walls, snap lid on top and bottom.
Clip!
Adding a little switch cover/extension for the power switch, but this is the final revision for now!
(Special thanks to co-worker with new Bambu printer for multiple revisions and test prints)
Boards!
Finishing touches on enclosure box to be revealed soon!
Finishing touches on enclosure box to be revealed soon!
October 1, 2025 at 2:34 AM
Boards!
Finishing touches on enclosure box to be revealed soon!
Finishing touches on enclosure box to be revealed soon!
Don't mind the mess. (And all the posts on sites that is all Barkitup related)
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
September 30, 2025 at 8:56 AM
Don't mind the mess. (And all the posts on sites that is all Barkitup related)
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
95% done (pinned), Need finishing touches - nose and teeth.
I hope it gets done This October or I'm going to cry lol. I feel bad that I've been going so slow, but sickness took over and I needed a long rest.
-Mori
I apologize for the double post, was just fixing something!
-Mori
-Mori
September 30, 2025 at 8:29 AM
I apologize for the double post, was just fixing something!
-Mori
-Mori
Since the about info box is too small for everything.
Mori decided to post this- to pin this.
-
How to contact us via Telegram.
t.me/Barkitup
-
For larger detailed posts
Patreon -
www.patreon.com/c/barkitup/h...
-
How to support
Ko-fi - Store / Support. (For now)
ko-fi.com/barkitup
Mori decided to post this- to pin this.
-
How to contact us via Telegram.
t.me/Barkitup
-
For larger detailed posts
Patreon -
www.patreon.com/c/barkitup/h...
-
How to support
Ko-fi - Store / Support. (For now)
ko-fi.com/barkitup
September 30, 2025 at 8:28 AM
Since the about info box is too small for everything.
Mori decided to post this- to pin this.
-
How to contact us via Telegram.
t.me/Barkitup
-
For larger detailed posts
Patreon -
www.patreon.com/c/barkitup/h...
-
How to support
Ko-fi - Store / Support. (For now)
ko-fi.com/barkitup
Mori decided to post this- to pin this.
-
How to contact us via Telegram.
t.me/Barkitup
-
For larger detailed posts
Patreon -
www.patreon.com/c/barkitup/h...
-
How to support
Ko-fi - Store / Support. (For now)
ko-fi.com/barkitup
We have started to put Digital Refsheets (furry adopts) on our Ko-fi ko-fi.com/barkitup
Each ref bought can become a fursuit later on.
We will open Fursuit Rank Tiers 1-F once we have finished premade- fire dog.
Some Rave Gear slots will be listed soon too once we have all the supplies.
-Mori
Each ref bought can become a fursuit later on.
We will open Fursuit Rank Tiers 1-F once we have finished premade- fire dog.
Some Rave Gear slots will be listed soon too once we have all the supplies.
-Mori
September 30, 2025 at 4:15 AM
We have started to put Digital Refsheets (furry adopts) on our Ko-fi ko-fi.com/barkitup
Each ref bought can become a fursuit later on.
We will open Fursuit Rank Tiers 1-F once we have finished premade- fire dog.
Some Rave Gear slots will be listed soon too once we have all the supplies.
-Mori
Each ref bought can become a fursuit later on.
We will open Fursuit Rank Tiers 1-F once we have finished premade- fire dog.
Some Rave Gear slots will be listed soon too once we have all the supplies.
-Mori
300 LED on Custom Controller test!
Multimeter apparently not reading voltage or current properly after sitting in storage so long.
Half of the calculated limit on the controller.
Ran FFT mode for over 3 hours before test was interrupted. (Cats ...)
Multimeter apparently not reading voltage or current properly after sitting in storage so long.
Half of the calculated limit on the controller.
Ran FFT mode for over 3 hours before test was interrupted. (Cats ...)
September 29, 2025 at 7:28 AM
300 LED on Custom Controller test!
Multimeter apparently not reading voltage or current properly after sitting in storage so long.
Half of the calculated limit on the controller.
Ran FFT mode for over 3 hours before test was interrupted. (Cats ...)
Multimeter apparently not reading voltage or current properly after sitting in storage so long.
Half of the calculated limit on the controller.
Ran FFT mode for over 3 hours before test was interrupted. (Cats ...)
Box! Button! USB!
Custom PCB based on a few Adafruit dev boards with some components beefed up for higher amperage, more LED potential, and use of 18650 battery.
Can be run and/or charged via onboard USB-C.
1 amp limited charge rate.
Main switching diodes rated for 5A.
Custom PCB based on a few Adafruit dev boards with some components beefed up for higher amperage, more LED potential, and use of 18650 battery.
Can be run and/or charged via onboard USB-C.
1 amp limited charge rate.
Main switching diodes rated for 5A.
September 18, 2025 at 4:34 AM
Box! Button! USB!
Custom PCB based on a few Adafruit dev boards with some components beefed up for higher amperage, more LED potential, and use of 18650 battery.
Can be run and/or charged via onboard USB-C.
1 amp limited charge rate.
Main switching diodes rated for 5A.
Custom PCB based on a few Adafruit dev boards with some components beefed up for higher amperage, more LED potential, and use of 18650 battery.
Can be run and/or charged via onboard USB-C.
1 amp limited charge rate.
Main switching diodes rated for 5A.
So... Metal hardware rivets or sewn edge?
September 16, 2025 at 6:45 PM
So... Metal hardware rivets or sewn edge?
Electrical test - Prototype 'standard' style harness (X + Y ?)
Full assembly soon-ish
Full assembly soon-ish
September 1, 2025 at 8:15 AM
Electrical test - Prototype 'standard' style harness (X + Y ?)
Full assembly soon-ish
Full assembly soon-ish
Bonus! As a treat!
First print test PCBs!
(Redesign soon, slight changes to layout and size)
First print test PCBs!
(Redesign soon, slight changes to layout and size)
August 29, 2025 at 5:48 AM
Bonus! As a treat!
First print test PCBs!
(Redesign soon, slight changes to layout and size)
First print test PCBs!
(Redesign soon, slight changes to layout and size)
Version 2.0 !! Code Demo:
Restructured and updated for new controller hardware.
(Custom designed, TBA)
New FFT (Fast Fourier Transform) logic, better frequency response, faster processing power, added colors to account for more frequency response zones.
(16 frequency ranges mapped to 8 colors)
Restructured and updated for new controller hardware.
(Custom designed, TBA)
New FFT (Fast Fourier Transform) logic, better frequency response, faster processing power, added colors to account for more frequency response zones.
(16 frequency ranges mapped to 8 colors)
August 29, 2025 at 4:48 AM
Version 2.0 !! Code Demo:
Restructured and updated for new controller hardware.
(Custom designed, TBA)
New FFT (Fast Fourier Transform) logic, better frequency response, faster processing power, added colors to account for more frequency response zones.
(16 frequency ranges mapped to 8 colors)
Restructured and updated for new controller hardware.
(Custom designed, TBA)
New FFT (Fast Fourier Transform) logic, better frequency response, faster processing power, added colors to account for more frequency response zones.
(16 frequency ranges mapped to 8 colors)
At the trust the process stages.
Everything is pinned on right now.
Got to hand sew the ear piece then sew the pinned pieces together. Trim the fur and pray I don't bald it! Then make the jawset/ pickable nose. Paint in the pupils of the eyes.
Just wanted to share what's done so far.
Everything is pinned on right now.
Got to hand sew the ear piece then sew the pinned pieces together. Trim the fur and pray I don't bald it! Then make the jawset/ pickable nose. Paint in the pupils of the eyes.
Just wanted to share what's done so far.
August 18, 2025 at 12:00 AM
At the trust the process stages.
Everything is pinned on right now.
Got to hand sew the ear piece then sew the pinned pieces together. Trim the fur and pray I don't bald it! Then make the jawset/ pickable nose. Paint in the pupils of the eyes.
Just wanted to share what's done so far.
Everything is pinned on right now.
Got to hand sew the ear piece then sew the pinned pieces together. Trim the fur and pray I don't bald it! Then make the jawset/ pickable nose. Paint in the pupils of the eyes.
Just wanted to share what's done so far.