Zortium 3D
@zortium3d.bsky.social
🇩🇰 3D Printing Enthusiast & Model Designer
Sharing my journey, self-made designs — improving every print
📦 Download my free models on Printables ⭐️
www.printables.com/@Zortium3D
Sharing my journey, self-made designs — improving every print
📦 Download my free models on Printables ⭐️
www.printables.com/@Zortium3D
#FeaturedFilamentFriday | Week 13: PolyTerra™ PLA+ Blue
⚠️ This is my last #FeaturedFilamentFriday on Bluesky -> continuing the series on Instagram!
Same great features as other PolyTerra PLA+: easy to print, low stringing, solid layer bonding, and that silky satin finish straight off the bed.
⚠️ This is my last #FeaturedFilamentFriday on Bluesky -> continuing the series on Instagram!
Same great features as other PolyTerra PLA+: easy to print, low stringing, solid layer bonding, and that silky satin finish straight off the bed.
July 11, 2025 at 6:26 PM
#FeaturedFilamentFriday | Week 13: PolyTerra™ PLA+ Blue
⚠️ This is my last #FeaturedFilamentFriday on Bluesky -> continuing the series on Instagram!
Same great features as other PolyTerra PLA+: easy to print, low stringing, solid layer bonding, and that silky satin finish straight off the bed.
⚠️ This is my last #FeaturedFilamentFriday on Bluesky -> continuing the series on Instagram!
Same great features as other PolyTerra PLA+: easy to print, low stringing, solid layer bonding, and that silky satin finish straight off the bed.
#FeaturedFilamentFriday — Week 12
✨ Filament Highlight: polymaker - PolyLite™ PETG Black
Tough, flexible, and low on stringing—this PETG handled mechanical stress and heat where PLA would’ve failed. Deep black, smooth finish, and crisp detail off a textured PEI sheet.
🖨️ 235 °C / 75 °C
✨ Filament Highlight: polymaker - PolyLite™ PETG Black
Tough, flexible, and low on stringing—this PETG handled mechanical stress and heat where PLA would’ve failed. Deep black, smooth finish, and crisp detail off a textured PEI sheet.
🖨️ 235 °C / 75 °C
June 27, 2025 at 9:56 PM
#FeaturedFilamentFriday — Week 12
✨ Filament Highlight: polymaker - PolyLite™ PETG Black
Tough, flexible, and low on stringing—this PETG handled mechanical stress and heat where PLA would’ve failed. Deep black, smooth finish, and crisp detail off a textured PEI sheet.
🖨️ 235 °C / 75 °C
✨ Filament Highlight: polymaker - PolyLite™ PETG Black
Tough, flexible, and low on stringing—this PETG handled mechanical stress and heat where PLA would’ve failed. Deep black, smooth finish, and crisp detail off a textured PEI sheet.
🖨️ 235 °C / 75 °C
#FeaturedFilamentFriday — Week 11
PolyTerra™ PLA+ Purple by @polymaker_3d is bold, matte, and prints like a dream. Great strength, easy flow, and that deep purple? Chef’s kiss.
Flexi T-Rex – champ.ly/zfYIzU0_
Low poly Mew – champ.ly/ye0Km3Pi
#3dprinting #polymaker #printables #purplePLA #FFF
PolyTerra™ PLA+ Purple by @polymaker_3d is bold, matte, and prints like a dream. Great strength, easy flow, and that deep purple? Chef’s kiss.
Flexi T-Rex – champ.ly/zfYIzU0_
Low poly Mew – champ.ly/ye0Km3Pi
#3dprinting #polymaker #printables #purplePLA #FFF
June 20, 2025 at 10:46 AM
#FeaturedFilamentFriday — Week 11
PolyTerra™ PLA+ Purple by @polymaker_3d is bold, matte, and prints like a dream. Great strength, easy flow, and that deep purple? Chef’s kiss.
Flexi T-Rex – champ.ly/zfYIzU0_
Low poly Mew – champ.ly/ye0Km3Pi
#3dprinting #polymaker #printables #purplePLA #FFF
PolyTerra™ PLA+ Purple by @polymaker_3d is bold, matte, and prints like a dream. Great strength, easy flow, and that deep purple? Chef’s kiss.
Flexi T-Rex – champ.ly/zfYIzU0_
Low poly Mew – champ.ly/ye0Km3Pi
#3dprinting #polymaker #printables #purplePLA #FFF
#FeaturedFilamentFriday — Week 10 🎉
Polymaker PolyTerra™ PLA+ White
This satin white PLA+ was the first filament I ever used, and the Benchy in the photo is my very first print, which just turned one year old! 🛳️🎂
The filament is clean, neutral white with a great satin finish.
Polymaker PolyTerra™ PLA+ White
This satin white PLA+ was the first filament I ever used, and the Benchy in the photo is my very first print, which just turned one year old! 🛳️🎂
The filament is clean, neutral white with a great satin finish.
June 13, 2025 at 7:55 PM
#FeaturedFilamentFriday — Week 10 🎉
Polymaker PolyTerra™ PLA+ White
This satin white PLA+ was the first filament I ever used, and the Benchy in the photo is my very first print, which just turned one year old! 🛳️🎂
The filament is clean, neutral white with a great satin finish.
Polymaker PolyTerra™ PLA+ White
This satin white PLA+ was the first filament I ever used, and the Benchy in the photo is my very first print, which just turned one year old! 🛳️🎂
The filament is clean, neutral white with a great satin finish.
#FeaturedFilamentFriday — Week 9
PolyTerra™ PLA+ Red by polymaker
Deep red, satin finish, low stringing — prints fast and clean. A solid performer!
🧵 Prints:
Flexi Rex: champ.ly/SXVmfooH
Heart Tealight: champ.ly/SwiAOg09
#3DPrinting #FFF #Polymaker #Printables #SatinPLA
PolyTerra™ PLA+ Red by polymaker
Deep red, satin finish, low stringing — prints fast and clean. A solid performer!
🧵 Prints:
Flexi Rex: champ.ly/SXVmfooH
Heart Tealight: champ.ly/SwiAOg09
#3DPrinting #FFF #Polymaker #Printables #SatinPLA
June 6, 2025 at 3:30 PM
#FeaturedFilamentFriday — Week 9
PolyTerra™ PLA+ Red by polymaker
Deep red, satin finish, low stringing — prints fast and clean. A solid performer!
🧵 Prints:
Flexi Rex: champ.ly/SXVmfooH
Heart Tealight: champ.ly/SwiAOg09
#3DPrinting #FFF #Polymaker #Printables #SatinPLA
PolyTerra™ PLA+ Red by polymaker
Deep red, satin finish, low stringing — prints fast and clean. A solid performer!
🧵 Prints:
Flexi Rex: champ.ly/SXVmfooH
Heart Tealight: champ.ly/SwiAOg09
#3DPrinting #FFF #Polymaker #Printables #SatinPLA
#FeaturedFilamentFriday — Week 8: Polymaker PolyLite™ PETG Silver
This PETG hits a sweet spot: strong but slightly flexible—great for both functional and aesthetic prints. The smooth surface finish and deep metallic silver look.
🖨️ Settings:
235 °C nozzle / 75 °C bed / textured PEI
This PETG hits a sweet spot: strong but slightly flexible—great for both functional and aesthetic prints. The smooth surface finish and deep metallic silver look.
🖨️ Settings:
235 °C nozzle / 75 °C bed / textured PEI
May 30, 2025 at 6:45 AM
#FeaturedFilamentFriday — Week 8: Polymaker PolyLite™ PETG Silver
This PETG hits a sweet spot: strong but slightly flexible—great for both functional and aesthetic prints. The smooth surface finish and deep metallic silver look.
🖨️ Settings:
235 °C nozzle / 75 °C bed / textured PEI
This PETG hits a sweet spot: strong but slightly flexible—great for both functional and aesthetic prints. The smooth surface finish and deep metallic silver look.
🖨️ Settings:
235 °C nozzle / 75 °C bed / textured PEI
#FeaturedFilamentFriday — Week 7
✨ Filament Highlight: 3DE Premium PBT+ Pirate Black
It’s soft and flexible in thin walls but super tough overall.
Great choice for outdoor or functional prints — rated for heat, cold, and UV resistance.
🖨️ 235 °C (hardened nozzle ⚠️), 65 °C bed, textured PEI.
✨ Filament Highlight: 3DE Premium PBT+ Pirate Black
It’s soft and flexible in thin walls but super tough overall.
Great choice for outdoor or functional prints — rated for heat, cold, and UV resistance.
🖨️ 235 °C (hardened nozzle ⚠️), 65 °C bed, textured PEI.
May 23, 2025 at 9:38 PM
#FeaturedFilamentFriday — Week 7
✨ Filament Highlight: 3DE Premium PBT+ Pirate Black
It’s soft and flexible in thin walls but super tough overall.
Great choice for outdoor or functional prints — rated for heat, cold, and UV resistance.
🖨️ 235 °C (hardened nozzle ⚠️), 65 °C bed, textured PEI.
✨ Filament Highlight: 3DE Premium PBT+ Pirate Black
It’s soft and flexible in thin walls but super tough overall.
Great choice for outdoor or functional prints — rated for heat, cold, and UV resistance.
🖨️ 235 °C (hardened nozzle ⚠️), 65 °C bed, textured PEI.
Printing an aerobar mount for my brother. It’ll hold a vertical plate for a bottle cage—serious engineering stuff.
Also my first time using PBT (requires a hardened steel nozzle!).
But mostly I’m just vibing with the squiggly infill lines.
Also my first time using PBT (requires a hardened steel nozzle!).
But mostly I’m just vibing with the squiggly infill lines.
May 22, 2025 at 8:42 PM
Printing an aerobar mount for my brother. It’ll hold a vertical plate for a bottle cage—serious engineering stuff.
Also my first time using PBT (requires a hardened steel nozzle!).
But mostly I’m just vibing with the squiggly infill lines.
Also my first time using PBT (requires a hardened steel nozzle!).
But mostly I’m just vibing with the squiggly infill lines.
#FeaturedFilamentFriday — Week 6
📦 Filament: Polymaker PolyTerra™ PLA Pastel Ice
A calm pastel blue with a matte finish — great for decorative prints, legible text, and clean details. Easy to print, no fuss.
🖨️ 200 °C | 60 °C | Textured PEI
#3dprinting #printables #mattePLA #pastelPLA
📦 Filament: Polymaker PolyTerra™ PLA Pastel Ice
A calm pastel blue with a matte finish — great for decorative prints, legible text, and clean details. Easy to print, no fuss.
🖨️ 200 °C | 60 °C | Textured PEI
#3dprinting #printables #mattePLA #pastelPLA
May 16, 2025 at 12:06 PM
#FeaturedFilamentFriday — Week 6
📦 Filament: Polymaker PolyTerra™ PLA Pastel Ice
A calm pastel blue with a matte finish — great for decorative prints, legible text, and clean details. Easy to print, no fuss.
🖨️ 200 °C | 60 °C | Textured PEI
#3dprinting #printables #mattePLA #pastelPLA
📦 Filament: Polymaker PolyTerra™ PLA Pastel Ice
A calm pastel blue with a matte finish — great for decorative prints, legible text, and clean details. Easy to print, no fuss.
🖨️ 200 °C | 60 °C | Textured PEI
#3dprinting #printables #mattePLA #pastelPLA
#FeaturedFilamentFriday — Week 5
🎨 Prusament PETG Pistachio
Muted pastel green, precise winding, and reliable PETG strength.
🧵 Prints:
Snap buckle by squinn → champ.ly/x4vWcnC7
my filament sample disk & nut
🖨️ 240 °C / 75 °C · Textured PEI
#3dprinting #prusament #printables
🎨 Prusament PETG Pistachio
Muted pastel green, precise winding, and reliable PETG strength.
🧵 Prints:
Snap buckle by squinn → champ.ly/x4vWcnC7
my filament sample disk & nut
🖨️ 240 °C / 75 °C · Textured PEI
#3dprinting #prusament #printables
May 9, 2025 at 4:20 PM
#FeaturedFilamentFriday — Week 5
🎨 Prusament PETG Pistachio
Muted pastel green, precise winding, and reliable PETG strength.
🧵 Prints:
Snap buckle by squinn → champ.ly/x4vWcnC7
my filament sample disk & nut
🖨️ 240 °C / 75 °C · Textured PEI
#3dprinting #prusament #printables
🎨 Prusament PETG Pistachio
Muted pastel green, precise winding, and reliable PETG strength.
🧵 Prints:
Snap buckle by squinn → champ.ly/x4vWcnC7
my filament sample disk & nut
🖨️ 240 °C / 75 °C · Textured PEI
#3dprinting #prusament #printables
#FeaturedFilamentFriday — Week 4
✨ Polymaker PolyLite™ PETG Clear
Beautiful glass-like results when printed slow with thick walls. Some stringing (typical for PETG) and raised text is hard to see — but the look is worth it.
🆓 Free files: champ.ly/823pj9Em
#3dprinting #printables #polymaker
✨ Polymaker PolyLite™ PETG Clear
Beautiful glass-like results when printed slow with thick walls. Some stringing (typical for PETG) and raised text is hard to see — but the look is worth it.
🆓 Free files: champ.ly/823pj9Em
#3dprinting #printables #polymaker
May 2, 2025 at 9:55 AM
#FeaturedFilamentFriday — Week 4
✨ Polymaker PolyLite™ PETG Clear
Beautiful glass-like results when printed slow with thick walls. Some stringing (typical for PETG) and raised text is hard to see — but the look is worth it.
🆓 Free files: champ.ly/823pj9Em
#3dprinting #printables #polymaker
✨ Polymaker PolyLite™ PETG Clear
Beautiful glass-like results when printed slow with thick walls. Some stringing (typical for PETG) and raised text is hard to see — but the look is worth it.
🆓 Free files: champ.ly/823pj9Em
#3dprinting #printables #polymaker
#FeaturedFilamentFriday – Week 3
Prusament Marble Grey PLA looks and feels like stone—matte, textured, no shine.
Prints perfectly with Prusa defaults. Great for decor, especially candle holders.
Pairs well with last week’s Viva La Bronze.
Featured: candle holder, nut, sample disk, MX Master 3 jig.
Prusament Marble Grey PLA looks and feels like stone—matte, textured, no shine.
Prints perfectly with Prusa defaults. Great for decor, especially candle holders.
Pairs well with last week’s Viva La Bronze.
Featured: candle holder, nut, sample disk, MX Master 3 jig.
April 25, 2025 at 10:36 AM
#FeaturedFilamentFriday – Week 3
Prusament Marble Grey PLA looks and feels like stone—matte, textured, no shine.
Prints perfectly with Prusa defaults. Great for decor, especially candle holders.
Pairs well with last week’s Viva La Bronze.
Featured: candle holder, nut, sample disk, MX Master 3 jig.
Prusament Marble Grey PLA looks and feels like stone—matte, textured, no shine.
Prints perfectly with Prusa defaults. Great for decor, especially candle holders.
Pairs well with last week’s Viva La Bronze.
Featured: candle holder, nut, sample disk, MX Master 3 jig.
🍼 Tired of teething rings tumbling in the fridge?
I made a 3D printed organizer that keeps them upright and easy to grab.
Parametric, fast print, no supports needed.
Grab it here: champ.ly/K_jwwbMU
#3DPrinting #Printables #ParametricDesign
I made a 3D printed organizer that keeps them upright and easy to grab.
Parametric, fast print, no supports needed.
Grab it here: champ.ly/K_jwwbMU
#3DPrinting #Printables #ParametricDesign
April 21, 2025 at 8:00 AM
🍼 Tired of teething rings tumbling in the fridge?
I made a 3D printed organizer that keeps them upright and easy to grab.
Parametric, fast print, no supports needed.
Grab it here: champ.ly/K_jwwbMU
#3DPrinting #Printables #ParametricDesign
I made a 3D printed organizer that keeps them upright and easy to grab.
Parametric, fast print, no supports needed.
Grab it here: champ.ly/K_jwwbMU
#3DPrinting #Printables #ParametricDesign
🖱️ Made a cutting jig for the Logitech MX Master 3 to shape Teflon tape into perfect mouse feet—no more messy cuts! Just press, slice, and glide.
🧵 Free STL: champ.ly/niKAfv77
#3DPrinting #Logitech #MXMaster3 #Printables
🧵 Free STL: champ.ly/niKAfv77
#3DPrinting #Logitech #MXMaster3 #Printables
April 20, 2025 at 10:00 AM
🖱️ Made a cutting jig for the Logitech MX Master 3 to shape Teflon tape into perfect mouse feet—no more messy cuts! Just press, slice, and glide.
🧵 Free STL: champ.ly/niKAfv77
#3DPrinting #Logitech #MXMaster3 #Printables
🧵 Free STL: champ.ly/niKAfv77
#3DPrinting #Logitech #MXMaster3 #Printables
✨ #FeaturedFilamentFriday ✨
This week: Transparent PLA Safety Orange from 3DE – UV-reactive!
Settings: 200-205°C, first layer +10°C, bed at 60°C.
Findings: First layer to 210°C, prints at 205°C-215°C.
Prints: LEGO Rock Crystal, dragon, Rubies.
Tried it?
#3DPrinting #FeaturedFilamentFriday
This week: Transparent PLA Safety Orange from 3DE – UV-reactive!
Settings: 200-205°C, first layer +10°C, bed at 60°C.
Findings: First layer to 210°C, prints at 205°C-215°C.
Prints: LEGO Rock Crystal, dragon, Rubies.
Tried it?
#3DPrinting #FeaturedFilamentFriday
April 18, 2025 at 9:00 AM
✨ #FeaturedFilamentFriday ✨
This week: Transparent PLA Safety Orange from 3DE – UV-reactive!
Settings: 200-205°C, first layer +10°C, bed at 60°C.
Findings: First layer to 210°C, prints at 205°C-215°C.
Prints: LEGO Rock Crystal, dragon, Rubies.
Tried it?
#3DPrinting #FeaturedFilamentFriday
This week: Transparent PLA Safety Orange from 3DE – UV-reactive!
Settings: 200-205°C, first layer +10°C, bed at 60°C.
Findings: First layer to 210°C, prints at 205°C-215°C.
Prints: LEGO Rock Crystal, dragon, Rubies.
Tried it?
#3DPrinting #FeaturedFilamentFriday
Quick 3D Printing Tip!
Had a cool dragon print fail mid-way when the head supports lifted off the bed. Instead of tossing it, I measured how far the print had gotten, sliced the model from that point, and printed just the top part. A little glue magic later — and it's whole again! 💪🔥
#3dprinting
Had a cool dragon print fail mid-way when the head supports lifted off the bed. Instead of tossing it, I measured how far the print had gotten, sliced the model from that point, and printed just the top part. A little glue magic later — and it's whole again! 💪🔥
#3dprinting
April 15, 2025 at 7:00 AM
Quick 3D Printing Tip!
Had a cool dragon print fail mid-way when the head supports lifted off the bed. Instead of tossing it, I measured how far the print had gotten, sliced the model from that point, and printed just the top part. A little glue magic later — and it's whole again! 💪🔥
#3dprinting
Had a cool dragon print fail mid-way when the head supports lifted off the bed. Instead of tossing it, I measured how far the print had gotten, sliced the model from that point, and printed just the top part. A little glue magic later — and it's whole again! 💪🔥
#3dprinting
🐣 Designed a cozy Easter - themed LED candle holder — fully parametric + customizable!
Fits tealights, stick candles, whatever you’ve got. Bonus: a groove around the base for decorating with little pastel eggs 🥚🌸
📦 Free download: champ.ly/zVbVmxLm
#3DPrinting #ParametricDesign #Printables
Fits tealights, stick candles, whatever you’ve got. Bonus: a groove around the base for decorating with little pastel eggs 🥚🌸
📦 Free download: champ.ly/zVbVmxLm
#3DPrinting #ParametricDesign #Printables
April 12, 2025 at 10:00 AM
🐣 Designed a cozy Easter - themed LED candle holder — fully parametric + customizable!
Fits tealights, stick candles, whatever you’ve got. Bonus: a groove around the base for decorating with little pastel eggs 🥚🌸
📦 Free download: champ.ly/zVbVmxLm
#3DPrinting #ParametricDesign #Printables
Fits tealights, stick candles, whatever you’ve got. Bonus: a groove around the base for decorating with little pastel eggs 🥚🌸
📦 Free download: champ.ly/zVbVmxLm
#3DPrinting #ParametricDesign #Printables
✨ #FeaturedFilamentFriday ✨
Starting off this weekly series with Prusament PLA Viva La Bronze — a stunning metallic filament that is very easy to print 🪙
Print Settings:
Printed at 210°C, heated bed at 60°C, using a textured PEI sheet.
#3DPrinting #FeaturedFilamentFriday
Starting off this weekly series with Prusament PLA Viva La Bronze — a stunning metallic filament that is very easy to print 🪙
Print Settings:
Printed at 210°C, heated bed at 60°C, using a textured PEI sheet.
#3DPrinting #FeaturedFilamentFriday
April 11, 2025 at 7:00 AM
✨ #FeaturedFilamentFriday ✨
Starting off this weekly series with Prusament PLA Viva La Bronze — a stunning metallic filament that is very easy to print 🪙
Print Settings:
Printed at 210°C, heated bed at 60°C, using a textured PEI sheet.
#3DPrinting #FeaturedFilamentFriday
Starting off this weekly series with Prusament PLA Viva La Bronze — a stunning metallic filament that is very easy to print 🪙
Print Settings:
Printed at 210°C, heated bed at 60°C, using a textured PEI sheet.
#3DPrinting #FeaturedFilamentFriday
This fully parametric storage container is designed for watchmaking oil bottles, but it can also hold other small bottles. The customizable design lets you adjust the size to fit different containers, making it a versatile addition to any workspace.
Check out the link in my bio!
#3dprinting
Check out the link in my bio!
#3dprinting
April 5, 2025 at 6:00 AM
This fully parametric storage container is designed for watchmaking oil bottles, but it can also hold other small bottles. The customizable design lets you adjust the size to fit different containers, making it a versatile addition to any workspace.
Check out the link in my bio!
#3dprinting
Check out the link in my bio!
#3dprinting
Had some fun with this one! A gold bar-inspired bead for hoodies and drawstrings—quick to print, no supports needed. There's a classic gold bar version and one to show off your favorite filament. Just a small detail to make people look twice!
#3dprinting
#3dprinting
April 3, 2025 at 10:00 AM
Had some fun with this one! A gold bar-inspired bead for hoodies and drawstrings—quick to print, no supports needed. There's a classic gold bar version and one to show off your favorite filament. Just a small detail to make people look twice!
#3dprinting
#3dprinting
Been tinkering with this stencil to cut Teflon tape for my Logitech MX Master 3 mouse. No more rough cuts or scratches — just clean, precise pads! Still refining the design, but I’ll share it on Printables soon. Check out my other finished models there!
#3dprinting
#3dprinting
April 1, 2025 at 7:00 AM
Been tinkering with this stencil to cut Teflon tape for my Logitech MX Master 3 mouse. No more rough cuts or scratches — just clean, precise pads! Still refining the design, but I’ll share it on Printables soon. Check out my other finished models there!
#3dprinting
#3dprinting
How do you store your filament? 🤔
I realized the depth of a filament spool is almost identical to the space behind my office door. Found the perfect holder, added magnets for my filament sample disks, and voilà 💡
Would love to hear how you all organize your filament 👇
#3dprinting
I realized the depth of a filament spool is almost identical to the space behind my office door. Found the perfect holder, added magnets for my filament sample disks, and voilà 💡
Would love to hear how you all organize your filament 👇
#3dprinting
March 30, 2025 at 10:00 AM
How do you store your filament? 🤔
I realized the depth of a filament spool is almost identical to the space behind my office door. Found the perfect holder, added magnets for my filament sample disks, and voilà 💡
Would love to hear how you all organize your filament 👇
#3dprinting
I realized the depth of a filament spool is almost identical to the space behind my office door. Found the perfect holder, added magnets for my filament sample disks, and voilà 💡
Would love to hear how you all organize your filament 👇
#3dprinting
I scaled down my 3D nozzle model to create these unique shoelace beads.
This model was designed as part of a contest over on Printables, where creativity meets 3D printing.
It's completely free to download on Printables! Check it out and give your laces a 3D printing twist!
#3dprinting
This model was designed as part of a contest over on Printables, where creativity meets 3D printing.
It's completely free to download on Printables! Check it out and give your laces a 3D printing twist!
#3dprinting
March 28, 2025 at 11:00 AM
I scaled down my 3D nozzle model to create these unique shoelace beads.
This model was designed as part of a contest over on Printables, where creativity meets 3D printing.
It's completely free to download on Printables! Check it out and give your laces a 3D printing twist!
#3dprinting
This model was designed as part of a contest over on Printables, where creativity meets 3D printing.
It's completely free to download on Printables! Check it out and give your laces a 3D printing twist!
#3dprinting
A bit over a month since Valentine's, but why not keep the love glowing? 💖
This heart-shaped tealight holder adds a cute touch to any space! Perfect for anyone with a 3D printer (or a friend who does) 🎁
The best part? It’s free on my Printables profile – link in bio!
#3dprinting #ValentinesDay
This heart-shaped tealight holder adds a cute touch to any space! Perfect for anyone with a 3D printer (or a friend who does) 🎁
The best part? It’s free on my Printables profile – link in bio!
#3dprinting #ValentinesDay
March 27, 2025 at 11:00 AM
A bit over a month since Valentine's, but why not keep the love glowing? 💖
This heart-shaped tealight holder adds a cute touch to any space! Perfect for anyone with a 3D printer (or a friend who does) 🎁
The best part? It’s free on my Printables profile – link in bio!
#3dprinting #ValentinesDay
This heart-shaped tealight holder adds a cute touch to any space! Perfect for anyone with a 3D printer (or a friend who does) 🎁
The best part? It’s free on my Printables profile – link in bio!
#3dprinting #ValentinesDay
Am I the only one here who's into both watchmaking and 3D printing? I'd love to hear what you're working on or what projects you've completed!
Right now, I'm making a container for my moebius 8200 oil to protect it from sunlight. 🛠️⏱️ #watchmaking #3dprinting
Right now, I'm making a container for my moebius 8200 oil to protect it from sunlight. 🛠️⏱️ #watchmaking #3dprinting
March 26, 2025 at 11:00 AM
Am I the only one here who's into both watchmaking and 3D printing? I'd love to hear what you're working on or what projects you've completed!
Right now, I'm making a container for my moebius 8200 oil to protect it from sunlight. 🛠️⏱️ #watchmaking #3dprinting
Right now, I'm making a container for my moebius 8200 oil to protect it from sunlight. 🛠️⏱️ #watchmaking #3dprinting