November 7, 2025 at 7:09 PM
Remember the sunny days of summer? I do 🥺 and I already miss them.
Happy #FursuitFriday!
🪡 @equinoxkitty.bsky.social (check her out, commissions open right now!! 👀)
📷 @mabsfloof.bsky.social
#Fursuit
Happy #FursuitFriday!
🪡 @equinoxkitty.bsky.social (check her out, commissions open right now!! 👀)
📷 @mabsfloof.bsky.social
#Fursuit
October 31, 2025 at 8:57 PM
Remember the sunny days of summer? I do 🥺 and I already miss them.
Happy #FursuitFriday!
🪡 @equinoxkitty.bsky.social (check her out, commissions open right now!! 👀)
📷 @mabsfloof.bsky.social
#Fursuit
Happy #FursuitFriday!
🪡 @equinoxkitty.bsky.social (check her out, commissions open right now!! 👀)
📷 @mabsfloof.bsky.social
#Fursuit
PCB photos!
Saved:
- chip to request 12V via USB-C PD
- 12v to 5V linear regular
New:
- Boost converter based on the LM2735X
I also made the debug connections pads instead of through-holes to make room on the other side for SMD stuff.
Saved:
- chip to request 12V via USB-C PD
- 12v to 5V linear regular
New:
- Boost converter based on the LM2735X
I also made the debug connections pads instead of through-holes to make room on the other side for SMD stuff.
October 26, 2025 at 10:31 AM
PCB photos!
Saved:
- chip to request 12V via USB-C PD
- 12v to 5V linear regular
New:
- Boost converter based on the LM2735X
I also made the debug connections pads instead of through-holes to make room on the other side for SMD stuff.
Saved:
- chip to request 12V via USB-C PD
- 12v to 5V linear regular
New:
- Boost converter based on the LM2735X
I also made the debug connections pads instead of through-holes to make room on the other side for SMD stuff.
Made a version 2 of my fan hardware. The fact that I was relying on a powerbank to keep giving me 12 volts was a never ending source of problems. This one in particular just wouldnt stay on 12V for longer than 10 minutes no matter what I tried.
So this version gets 5V and boosts it to 12V.
So this version gets 5V and boosts it to 12V.
October 26, 2025 at 10:31 AM
Made a version 2 of my fan hardware. The fact that I was relying on a powerbank to keep giving me 12 volts was a never ending source of problems. This one in particular just wouldnt stay on 12V for longer than 10 minutes no matter what I tried.
So this version gets 5V and boosts it to 12V.
So this version gets 5V and boosts it to 12V.
October 17, 2025 at 9:31 PM
October 10, 2025 at 12:50 PM
I hate it when stores have stuff in my fursona colors. anyways I now own 3 spare dish brushes…
October 7, 2025 at 7:05 PM
I hate it when stores have stuff in my fursona colors. anyways I now own 3 spare dish brushes…
Blep in the spotlight 👅 👉👈
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitFriday
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitFriday
October 3, 2025 at 6:15 PM
Blep in the spotlight 👅 👉👈
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitFriday
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitFriday
Have some PCB photos.
Nerd statistics:
- STM32 (STM32F103C8T6)
- USB Type C PD-chip HUSB238 (to get 12V)
- LDOs making 5V and 3.3V
- Level shifter to make the correct 25kHz 5V PWM signal for the fan
- Variable dummy load to keep power bank on (for low fan speeds)
- RGB LED to indicate power level
Nerd statistics:
- STM32 (STM32F103C8T6)
- USB Type C PD-chip HUSB238 (to get 12V)
- LDOs making 5V and 3.3V
- Level shifter to make the correct 25kHz 5V PWM signal for the fan
- Variable dummy load to keep power bank on (for low fan speeds)
- RGB LED to indicate power level
September 28, 2025 at 3:49 PM
Have some PCB photos.
Nerd statistics:
- STM32 (STM32F103C8T6)
- USB Type C PD-chip HUSB238 (to get 12V)
- LDOs making 5V and 3.3V
- Level shifter to make the correct 25kHz 5V PWM signal for the fan
- Variable dummy load to keep power bank on (for low fan speeds)
- RGB LED to indicate power level
Nerd statistics:
- STM32 (STM32F103C8T6)
- USB Type C PD-chip HUSB238 (to get 12V)
- LDOs making 5V and 3.3V
- Level shifter to make the correct 25kHz 5V PWM signal for the fan
- Variable dummy load to keep power bank on (for low fan speeds)
- RGB LED to indicate power level
Step 4: Final installation. I asked my maker @equinoxkitty.bsky.social to add a pocket in the front neck for this, so that‘s where the controller and powerbank go!
September 28, 2025 at 3:19 PM
Step 4: Final installation. I asked my maker @equinoxkitty.bsky.social to add a pocket in the front neck for this, so that‘s where the controller and powerbank go!
Controller in action! Me cycling through all the available speeds.
Note there is no „off“ speed, you would just unplug the USB for that. This is to save battery, because then the powerbank can also go to sleep.
Note there is no „off“ speed, you would just unplug the USB for that. This is to save battery, because then the powerbank can also go to sleep.
September 28, 2025 at 3:19 PM
Controller in action! Me cycling through all the available speeds.
Note there is no „off“ speed, you would just unplug the USB for that. This is to save battery, because then the powerbank can also go to sleep.
Note there is no „off“ speed, you would just unplug the USB for that. This is to save battery, because then the powerbank can also go to sleep.
Cable to the fan goes through a printed TPU (rubber) strain relief/cable grip that should make this end quite durable as well.
September 28, 2025 at 3:19 PM
Cable to the fan goes through a printed TPU (rubber) strain relief/cable grip that should make this end quite durable as well.
Since this is a 12V fan, you do need a powerbank that can output that. (USB Type C Power Delivery).
Thankfully these are pretty common nowadays. Most powerbanks that support fast charging can output this voltage, but it is important to check.
Thankfully these are pretty common nowadays. Most powerbanks that support fast charging can output this voltage, but it is important to check.
September 28, 2025 at 3:19 PM
Since this is a 12V fan, you do need a powerbank that can output that. (USB Type C Power Delivery).
Thankfully these are pretty common nowadays. Most powerbanks that support fast charging can output this voltage, but it is important to check.
Thankfully these are pretty common nowadays. Most powerbanks that support fast charging can output this voltage, but it is important to check.
The center piece of the build is this small controller I made.
It‘s permanently attached to the fan and can be powered with a USB Type C powerbank.
You select the speed you want with the buttons. Each speed has an associated color that lights up, so it‘s easy to remember what setting you liked.
It‘s permanently attached to the fan and can be powered with a USB Type C powerbank.
You select the speed you want with the buttons. Each speed has an associated color that lights up, so it‘s easy to remember what setting you liked.
September 28, 2025 at 3:19 PM
The center piece of the build is this small controller I made.
It‘s permanently attached to the fan and can be powered with a USB Type C powerbank.
You select the speed you want with the buttons. Each speed has an associated color that lights up, so it‘s easy to remember what setting you liked.
It‘s permanently attached to the fan and can be powered with a USB Type C powerbank.
You select the speed you want with the buttons. Each speed has an associated color that lights up, so it‘s easy to remember what setting you liked.
Step 3: The fan itself, attached with velcro.
Hot glue to secure the wires from breaking off. A finger guard to precent chopping.
This is a SANYO DENKI 109P0412P3H013.
12V, 8700 rpm, 4-wire (with PWM - important), 40x40x28mm
I removed the tachometer wire, which is why you see only 3 wires.
Hot glue to secure the wires from breaking off. A finger guard to precent chopping.
This is a SANYO DENKI 109P0412P3H013.
12V, 8700 rpm, 4-wire (with PWM - important), 40x40x28mm
I removed the tachometer wire, which is why you see only 3 wires.
September 28, 2025 at 3:19 PM
Step 3: The fan itself, attached with velcro.
Hot glue to secure the wires from breaking off. A finger guard to precent chopping.
This is a SANYO DENKI 109P0412P3H013.
12V, 8700 rpm, 4-wire (with PWM - important), 40x40x28mm
I removed the tachometer wire, which is why you see only 3 wires.
Hot glue to secure the wires from breaking off. A finger guard to precent chopping.
This is a SANYO DENKI 109P0412P3H013.
12V, 8700 rpm, 4-wire (with PWM - important), 40x40x28mm
I removed the tachometer wire, which is why you see only 3 wires.
Step 2: This 3D printed piece that provides a surface for the fan to be stuck on in the next step. It also angles the fan a bit down so the airstream hits both my nose and mouth area.
September 28, 2025 at 3:19 PM
Step 2: This 3D printed piece that provides a surface for the fan to be stuck on in the next step. It also angles the fan a bit down so the airstream hits both my nose and mouth area.
Step 1: Added velcro to the nose bridge of my suit here. (Self-adhesive strips)
Pro tip: use the soft side, or it gets scratchy inside :)
Pro tip: use the soft side, or it gets scratchy inside :)
September 28, 2025 at 3:19 PM
Step 1: Added velcro to the nose bridge of my suit here. (Self-adhesive strips)
Pro tip: use the soft side, or it gets scratchy inside :)
Pro tip: use the soft side, or it gets scratchy inside :)
What‘s cooler than fursuiting? Doing it while staying cool yourself :)
I made this mod for my fursuit to add a fan, which is:
- variable speed, quickly selectable
- powered by USB Type C
- quite compact
I did a bunch of design work on the controller for this, so I wanted to share! (Thread)
I made this mod for my fursuit to add a fan, which is:
- variable speed, quickly selectable
- powered by USB Type C
- quite compact
I did a bunch of design work on the controller for this, so I wanted to share! (Thread)
September 28, 2025 at 3:19 PM
What‘s cooler than fursuiting? Doing it while staying cool yourself :)
I made this mod for my fursuit to add a fan, which is:
- variable speed, quickly selectable
- powered by USB Type C
- quite compact
I did a bunch of design work on the controller for this, so I wanted to share! (Thread)
I made this mod for my fursuit to add a fan, which is:
- variable speed, quickly selectable
- powered by USB Type C
- quite compact
I did a bunch of design work on the controller for this, so I wanted to share! (Thread)
All my homies love trams 💯
Historical tram in Malmö 🇸🇪 (www.mss.se)
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
Historical tram in Malmö 🇸🇪 (www.mss.se)
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
September 26, 2025 at 8:26 AM
All my homies love trams 💯
Historical tram in Malmö 🇸🇪 (www.mss.se)
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
Historical tram in Malmö 🇸🇪 (www.mss.se)
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
that’s kinda SUSSY ඞ 📮
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
September 22, 2025 at 11:23 PM
that’s kinda SUSSY ඞ 📮
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
Engaging no-brain mode 😺
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
September 21, 2025 at 10:52 PM
Engaging no-brain mode 😺
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
📷 @mabsfloof.bsky.social
🪡 @equinoxkitty.bsky.social
#Fursuit #FursuitEveryday
Peeking over some flowers w/ @mabsfloof.bsky.social :3
📷 @zarzus.bsky.social
🧵💜 @lemonbrat.bsky.social
🧵🧡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
📷 @zarzus.bsky.social
🧵💜 @lemonbrat.bsky.social
🧵🧡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
September 19, 2025 at 9:03 AM
Peeking over some flowers w/ @mabsfloof.bsky.social :3
📷 @zarzus.bsky.social
🧵💜 @lemonbrat.bsky.social
🧵🧡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
📷 @zarzus.bsky.social
🧵💜 @lemonbrat.bsky.social
🧵🧡 @equinoxkitty.bsky.social
#Fursuit #FursuitFriday
September 13, 2025 at 9:18 PM
Recharging from the orb in progress…
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitEveryday
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitEveryday
September 13, 2025 at 8:42 AM
Recharging from the orb in progress…
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitEveryday
🪡 @equinoxkitty.bsky.social
📷 @mabsfloof.bsky.social
#Fursuit #FursuitEveryday