If you see this, post a photo from your phone with no explanation.

I made this one. Supports RJ12, 1.27mm 10 pin Cortex-M, and 2.56mm 6 pin tag connect cabled. Furthermore, can supply the target with selectable voltage.
It has jumpers to enable the SWD mode on FTDI based adapters, and breaks out the UART on a J-Link.
github.com/a-v-s/debug-...

Having a look inside my mouse. It's having bouncing issues, causing it to double click when a single click is intended.

They screwed a block of metal in there. lol

Changing DNS server

Don't clean your OWON multimeter with IPA. The labelling will come right off.

However, for the LED connector it seems I have made a measurement error, as the connector won't fit.

The part goes around a pin header, and prevents the battery connector to be plugged in the wrong way.

These are common connectors for LED strips and batteries sold on AliExpress. They come as a set male and female. However, I am looking for a wire-to-board counterpart. As I have not been able to locate such, I did my first attempt to have something 3d-printed.

Here is my PMOD Board for the M590E GPRS Module. www.blaatschaap.be/gprs-modules...

De wintertijd is begonnen!

Unfortunately, I've swapped the SPI and I²C ports.

That's why I am a PMOD board for it. Just put it in, and it' all connected up.

This looks like messy, and is a bit clumsy isn't it? When one wire gets loose, finding where it should go is a pain.